Ford Fiesta Radiator Support Bracket - image

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

0 model files

Recommended kit

—

Based on 40% main infill across listed model files

Material cost

$0.00

Filament only at roughly $24/kg ASA / ABS

Print time

—–—

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Fiesta Radiator Support Bracket

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The original clips that hold down the radiator support bushings were missing from my Ford Fiesta ST. This part replaces ford part number 8A194. ABS or equivalent is recommended due to the thermal requirements. The design is far from perfect, but clipped nicely into place and seems solid. 40% infill was my first guess, I may print more solid depending how the part holds up.

Compatible Cars

Ford Fiesta

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by (mattmfhe) · License: CC BY-NC-SA

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.