Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford FITS Pez Dispensor Holder (2022 Ford Maverick)
Shared by
3DPrintedCarPartDescription
This is a Pez dispenser slotting stand to hold Pez while you drive. I designed this to work with a FITS slot attached to an adapter that fits in the cubby hole on the dash. I printed this on a Creality Ender 3 with eSUN PETG using the following settings: Print Temperature: 245 Plate Temperature (Initial Layer): 80 Plate Temperature: 70 The rest of my settings were autoapplied via the eSun Black PETG with 0.4mm nozzle extruder settings in Cura 4.13. Print time total projected at 3 hours 56 minutes. For Randy H. on MVT forums:0.
Compatible Cars
Originally published on thingiverse.com by John Klockenkemper (Kl0ck) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
