Ford FITS Press Fit Cubby Garage Door Opener Holder (2022 Ford Maverick) - image

Files (1)

Ford_FITS_Press_Fit_Cubby_Garage_Door_Opener_Holder_2022_Ford_Maverick.stl

STL

6.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 25%	100% solid	Recommendation
Ford_FITS_Press_Fit_Cubby_Garage_Door_Opener_Holder_2022_Ford_Maverick.stl	Mount / bracket	6.9 KB STL	Slice file	Slice file	Slice file	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Organizers

Ford FITS Press Fit Cubby Garage Door Opener Holder (2022 Ford Maverick)

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a garage door opener holder attached to the press fit blank plate. I will print this on a Creality Ender 3 with eSUN PETG using the following settings: Print Temperature: 245 Plate Temperature (Initial Layer): 80 Plate Temperature: 70 The rest of my settings were autoapplied via the eSun Black PETG with 0.4mm nozzle extruder settings in Cura 4.13. Print time total projected 4 hours 17 minutes. For Randy H. on MVT forums:0.