Files (1)

Ford_Flex_Storage_Latch.stl

STL

108.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Flex_Storage_Latch.stl	Primary model	108.5 KB STL	Slice file	Slice file	Slice file	Use a brim or raft for improved adhesion

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Flex Storage Latch

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The latch broke from the storage compartment in the back of our 2011 Ford Flex, so I did what anyone with a 3D printer would do, and fixed the problem the hard way. Printed on a MakerBot Replicator 5th gen with standard settings, raft, no supports, 10% infill. Attaches with the screws from the original part. Tinkercad project at https://tinkercad.com/things/alotDCA9nZQ