Ford Focus 1999 Headlight Dust Cover - image

Files (4)

capac_dreapta.step

STEP

2.2 MB

capac_dreapta.stl

STL

4.3 MB

capac_stanga.step

STEP

2.1 MB

capac_stanga.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

4 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
capac_dreapta.step	Cover / cap	2.2 MB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
capac_dreapta.stl	Cover / cap	4.3 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
capac_stanga.step	Cover / cap	2.1 MB STEP	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.
capac_stanga.stl	Cover / cap	2.9 MB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Focus 1999 Headlight Dust Cover

0 downloads8 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

4 hosted model files

STL + STEP

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill, 1.2-1.6 mm walls

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Replacement for the headlight dust cover on a Ford Focus mk1 1999. Catalog note: Ford Focus 1999 Headlight Dust Cover is a 3D-printable car-part listing indexed for classified fitment 1999 Ford Focus. Provenance: source thingiverse.com, license CC BY. Use the linked source page for creator print settings, dimensions, and final fitment checks before printing.