Ford Focus 2012 Windshield Washer Fluid Reservoir Cap v2 - image

Files (2)

FordFocus2012_WindshieldWiper_v2_Base.stl.stl

STL

357.4 KB

FordFocus2012_WindshieldWiper_v2_Cap.stl.stl

STL

513.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FordFocus2012_WindshieldWiper_v2_Base.stl.stl	Printable file	357.4 KB STL	Slice file	Slice file	Slice file	Ensure proper fit before printing by checking dimensions against your Ford Focus's windshield washer fluid reservoir
FordFocus2012_WindshieldWiper_v2_Cap.stl.stl	Cover / cap	513.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Focus 2012 Windshield Washer Fluid Reservoir Cap v2

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I have a Ford Focus 2012 (Hatchback) and after 9 years of prolonged heat, the windshield wiper tank cap decided to disintegrate. I whipped this up it Fusion 360 and printed it in PETG. This cap may fit newer ford(s) vehicles. Update: I updated the model to be a little easier for some people, this is a push-fit with a screw-on lid.