Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG 20% | PETG 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Clutch_Spring_Housing.stl | Primary model | 674.7 KB STL | Slice file | Slice file | Slice file | Ensure good adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Focus Clutch Pedal Helper Spring Retainer
Shared by
3DPrintedCarPartDescription
When wanting to switch out the clutch spring with one that has a lower spring rate (Steeda for example), the hardest part of doing the swap is disassembling the plastic retainer assembly. Doing so can sometimes break one of the components (the part featured in this case) if not being cautious. This isn't a part that Ford sells and you can't find them used online. Either you go to a junkyard and pull one out of a scrap car (run the risk of breaking it again), buy the $80+ assembly that is already put together, or you can print this one. PETG is recommended since this isn't a high stress application but you want good resilience to deformation and resistance to high temperatures depending on where you live.
Compatible Cars
Originally published on thingiverse.com by Casey Barnett (thecaseybarnett) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
