Files (1)

Focus-scitnik_vrat_LEVI+nosilec_v8.stl

STL

2.2 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Focus-scitnik_vrat_LEVI+nosilec_v8.stl	Primary model	2.2 MB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer for optimal printing

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Door Handles

Ford focus door guard

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The door guards on ford focus are great, but once you loose them or they broke, they are quite expensive. so i designed my own for printing. After some trial and error they come out nice. For the right door, just flip it in slicer. I printed mine in PETG. They should handle 70C. So it should be fine on summer sun. I think Nylon would be better, but for no i don't have it.