Files (1)

Ford_Focus_fusebox_cover_clip_v1.stl

STL

523.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Focus_fusebox_cover_clip_v1.stl	Cover / cap	523.0 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and supports likely, verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Ford Focus fusebox cover clip

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a clip used to keep the upholstery up that covers the fusebox on the passengerside of a Ford Focus mk2. I'ts a tricky (seemingly impossible) peace to print. I couldn't get cura to make decent, removable supports without breaking the print. But even with most of the supports still in it seems to do it's job.