Files (2)

Ford_Focus_Bumper_Clip.stl

STL

338.4 KB

Ford_Focus_Bumper_Clip_-_rotated.stl

STL

339.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Focus_Bumper_Clip.stl	Clip	338.4 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent part warping
Ford_Focus_Bumper_Clip_-_rotated.stl	Clip	339.0 KB STL	Slice file	Slice file	Slice file	Ensure proper bed adhesion to prevent part warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Side Skirts

Ford Focus MK1 Bumper Clip

0 downloads43 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a plastic expansion nut that goes between the plastic outer sill / skirt and the metal body part of a Ford Focus MK1. Dimensions: Expansion part: 8mm x 8mm, 10mm height Main washer: 20mm diameter, 3mm height Mini washer: 9mm diameter, 3mm height Screw hole: 3.8mm diameter Included is also the.STL for a rotated version, which should have better strength and does not need supports.