Ford Focus replacement speaker ring - image

Files (2)

6.5_Speaker_ring_left_V2.stl

STL

116.9 KB

6.5_Speaker_ring_right_v2.stl

STL

116.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
6.5_Speaker_ring_left_V2.stl	Choose left variant	116.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.
6.5_Speaker_ring_right_v2.stl	Choose right variant	116.9 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA, 4 walls, 25% infill. Pick the matching side before printing.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Ford Focus replacement speaker ring

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the final version for me. I have both sides printed and mounted in car and they are holding up well. I highly recommend PETG or ABS or any other filament that can handle high operating temperatures. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/jHB5crjIlmG