Ford Focus SE Shifter Linkage Bushing - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	TPU 20%	TPU 10%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Focus SE Shifter Linkage Bushing

0 downloads46 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The automatic shift lever linkage broke in my daughters car, and the parts available at the parts store didn't fit very well, so here it is, the Automatic shifter linkage bushing for a 2008-2011 Ford Focus SE. Printing: Recommend using TPU for this print, as it needs to be flexible. You may need to trim the nubs on one end a little, to make installing it a little easier. Nozzle: 0.4mm Layer Height 0.2mm Speed: 20mm/s 4 Perimeters 3 top and bottom layers.