Files (1)

ford_focus_visor_clip.stl

STL

2.8 MB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

50g

Based on 25% main infill across listed model files

Material cost

$1.20

Filament only at roughly $24/kg PETG / ASA

Print time

2.0h saved / 1.4h–2.4h estimate

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ford_focus_visor_clip.stl	Clip	2.8 MB STL	46g $1.10	50g $1.20	110g $2.63	Print with locator pins pointing into the bed for optimal support

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Accessories

Ford Focus visor retainer

0 downloads260 views0 likes

Shared by

Michael Chen

Verified

Description

I designed this for my 2002 Ford Focus as the OEM retainer had split rendering it useless. The way this part fits on the visor can be greatly affected by the way your printer prints, but this can be adjusted by scaling the .STL up or down just a little bit. If scaled, this will change the size and location of the locator pins, but they can simply be snapped off and be good to go. I printed it with the locator pins pointing into the bed and used support.

Print Settings

Time: 2h

Filament: 50g

Supports: Not needed

Compatible Cars

Ford (all models)

Published Mar 8, 2026Updated Jul 15, 2026

Originally published on thingiverse.com · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.