Files (1)

Ford_Frame_Cover.stl

STL

55.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Ford_Frame_Cover.stl	Cover / cap	55.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford front frame hole cover

0 downloads37 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

On Ford F150, Expedition, etc. (90's - 2000's, maybe others) the lower front frame has an access hole for the lower A-arm bolt. There is a pop in plastic cover for the hole used to keep out rocks, dirt, mud, etc. The Ford factory part is no longer available and I was unable to get a replacement for one that went missing on my 1997 Expedition. So here is the replacement!