Ford/Mercury Capri 1989-95 bonnet strut stowage clip - image

Files (1)

strut_clip.stl

STL

20.2 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

Based on 25% main infill across listed model files

Material cost

$0.22

Filament only at roughly $24/kg PETG / ASA

Print time

15m–26m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
strut_clip.stl	Clip	20.2 KB STL	8g $0.20	9g $0.22	20g $0.47	Small functional file: print slowly; consider 80–100% infill for durability.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford/Mercury Capri 1989-95 bonnet strut stowage clip

0 downloads29 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a bonnet strut stowage clip for an Australian built Ford/Mercury Capri (1989-94). This part is not a copy of the original injection molded part, it has been optimised for 3D FDM printing. It's nice and strong! May work on other vehicles, examine the FreeCAD file to see if your receptacle has the same geometry!

Compatible Cars

Ford Capri

Updated Jul 15, 2026

Originally published on thingiverse.com by Roman Splawinski (RomanStefan) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.