Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| FordModeo_MK4_ConsoleCover_Thread.stl | Cover / cap | 2.9 MB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Mondeo MK4 Console Cover Adapter for Multifunctional Arm and PopSocket Vent Mount
Print this part
Check the available model and saved setup details before opening your slicer.
Files
1 hosted model file
STL
Material
PETG or ASA for durability in car conditions
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for a balance between strength and weight
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
Couldn't find a decent PopSocket phone holder for my car so ended up making my own by combining a few different models and modeling some myself. Seems that the PopSocket Car Vent Mount is an older version though, but the adapter could be modified for the newer version. The picture has a shorter arm (50mm) but ended up printing a longer arm (75mm). The arm has no threads due to the other parts having the threads. Also did a direction change to suit my needs. The bolts can be found in the original model: https://www.printables.com/model/1153921-multifunctional-arm-phone-holder Video of the PopSocket Car Vent Mount I used: The prinder adapter as itself: The mount and adapter combined:.
Compatible Cars
Originally published on printables.com by rairairia · License: CC BY-SA
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Ford Mondeo MK5 Sync3 frame, holder
Oneplus 5 and 5T holder with charging for Ford Mondeo MK4
Ford Mondeo MK4 Mount
FORD Mondeo MK4 - GoGen mobil holder part
2015-2020 Ford F150 Double Center Console QI Phone Holder
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
