Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Mustang Mach-E LiftPoint Puck Gasket
Shared by
3DPrintedCarPartDescription
This gasket adds additional protection to the underbody of a Ford Mustang Mach-E, when installing lift-point pucks. This gasket is specifically made for the following lift-point pucks: https://www.amazon.com/dp/B095GP1SSP?psc=1&linkCode=sl1&tag=leshshopa-20&linkId=f428e5cd56a19fb5d9befe5befb59384&language=en_US&ref_=as_li_ss_tl The installation utilizes just one of the mounting bolts, which is assisted by the additional tabs that serve to keep the mounting block/nut from spinning during installation. The gasket has a flat edge for aligning with the MME outer trim edge, and there is a riser column that aids in centering the puck into the hole in the actual lift-point between the two guide arrows. Here is a PDF that highlights the lift point positions: https://www.macheforum.com/site/attachments/mach-e-jacking-and-lifting-pdf.13266/
Compatible Cars
Originally published on thingiverse.com by Leon Shaner (AEtherScythe) · License: CC BY-NC
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
