Files (1)

Ford_Oil_Cap.STL

STL

415.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ABS 20%	PETG / ABS 10%	100% solid	Recommendation
Ford_Oil_Cap.STL	Cover / cap	415.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ABS; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Oil Filler Cap

0 downloads39 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this to fit my 2005 Ford Focus, it may work for other ford models. I would only recommend that this be used as a temporary solution, while you wait for a proper part. I printed it in PETG, but ABS would be even better for dealing with the high temps of the engine. I only used it for a couple of days but it seemed to hold up pretty well!