Files (1)

Parcel_Shelf_Hanger_Clip_Revised.stl

STL

834.3 KB

Print guidance estimate

Estimated from part metadata

Print cost & setup estimate

Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.

1 model file

Recommended kit

28g

Based on 25% main infill across listed model files

Material cost

$0.67

Filament only at roughly $24/kg PETG / ASA

Print time

48m–1.3h

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Parcel_Shelf_Hanger_Clip_Revised.stl	Clip	834.3 KB STL	26g $0.62	28g $0.67	62g $1.48	Ensure proper orientation for minimal supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

Ford Parcel Shelf Hanger Clip

0 downloads45 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is a replacement for the original Ford Parcel Shelf Hanger Clip. These clips are used on the tailgate of the Ford Fiesta Mk5 and the Ford Fusion to attach the parcel shelf cords. They are suitable for the models: Ford Fiesta Mk5 (2002-2008) and the Ford Fusion (2002-2012). To put them in place, first put them in from the long side, and then turn them 90°.

Compatible Cars

Ford (all models)

Published Jun 28, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by Theodoros Karypidis (TafKapa) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…

Comments (0)

Part lists

Save this part to named public or private collections. Public lists can be shown on this part page.

Related Parts

Finding specific fitment/category matches first.