Ford Power Window Regulator Gear Plug - image

Files (1)

Window_Regulator_Gear_Plug.STL

STL

38.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 100%	100% solid	Recommendation
Window_Regulator_Gear_Plug.STL	Primary model	38.9 KB STL	Slice file	Slice file	Slice file	Print with a solid infill for maximum strength.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Power Window Regulator Gear Plug

0 downloads120 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

If you have an old Ford where the power windows have failed, it could be the Gear Plugs have shattered. So you COULD order new ones and wait for them to show up or you could 3D print the replacement parts. Print three of this simple little nubbin and you're good to go! I made mine from PETG and they worked like a champ. Print them solid. BTW - if you want a good video showing this repair (but not using this print) here's a good one. https://www.youtube.com/watch?v=L2Xbs0ke8TY