Ford Ranger fan control knob 1993 - image

Files (1)

ranger_knob_v2.stl

STL

710.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ranger_knob_v2.stl	Primary model	710.0 KB STL	Slice file	Slice file	Slice file	Scale up the model by 1-2% in the slicer for an easier fit

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

Ford Ranger fan control knob 1993

0 downloads35 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This was designed from my broken 1993 ford ranger fan speed knob. its not a perfect design but it works perfect.It is a petty snug fit and has to be pressed in and if you want to remove you will need pliers or you could scale up in your slicer by 1 or 2 percent. Prints faster with tree supports and part standing up.