Files (2)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| ranger_final_middle_vent_v1.stl | Printable file | 221.7 KB STL | Slice file | Slice file | Slice file | Ensure a snug fit by filling the hole with a suitable material if the original metal fitting is not present |
| ranger_final_v1.stl | Printable file | 221.3 KB STL | Slice file | Slice file | Slice file | Ensure a snug fit by filling the hole with a suitable material if the original metal fitting is not present |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford ranger/mazda bt50 aircon knobs
Shared by
3DPrintedCarPartDescription
For these to fit there will be a small metal fitting on the original knobs, this fitting must be inserted into the hole of the 3d printed knobs. if no fitting is present then just use whatever you can to fill the hole to fit snugly on the shaft. 'middle vent' is as the name represents, the middle vent knob has a longer end (for some reason unknown to science).
Compatible Cars
Originally published on thingiverse.com by william nielsen (AltTabz) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
