Files (1)

FordRanger_USB_Fascia.stl

STL

119.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FordRanger_USB_Fascia.stl	Primary model	119.2 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Ford Ranger USB Fascia

0 downloads28 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Changed to an aftermarket stereo head unit and the stock USB adapter was not compatible with the new head unit. I designed this USB fascia to accept a flush mount USB extension and fit in the stock location. I used the flush mount USB extension found here - https://www.amazon.com/dp/B078LRSZDB?psc=1&ref=ppx_yo2ov_dt_b_product_details. Used ABS as I live in Arizona and it can get quite hot inside a vehicle in the summer (120 degrees +).