vantop reverse cam mount (ford ranger) - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

vantop reverse cam mount (ford ranger)

0 downloads42 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

I needed a bracket to mount my backup camera in my ford ranger (2008 XL), so a little modeling an printing and i came up with this. I had already removed the stock headliner, so there was a nut/bolt exposed for the bracket to go onto above the center of the rear window. I used the mount and tape that came in the kit to mount the backup camera to the 3d printed bracket.