ford rear hatch replacement part - image

Files (1)

ford.stl

STL

47.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
ford.stl	Primary model	47.1 KB STL	Slice file	Slice file	Slice file	Ensure proper orientation in the slicer to minimize supports

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Trunk/Tailgate

ford rear hatch replacement part

0 downloads27 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

this is a replacement part for most fords and for any other car that uses this type of piece. i used a 1/4 bolt and nut to connect to the hatch handle and a nut to connect to the existing threaded rod. nuts for the threaded rod might be different on your car.