Ford Super Duty Transmission Cable Bushing - image

Files (1)

Superduty_Trans_Cable_Bushing.STL

STL

120.1 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Superduty_Trans_Cable_Bushing.STL	Primary model	120.1 KB STL	Slice file	Slice file	Slice file	Ensure a snug fit by adjusting print settings if necessary

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

Ford Super Duty Transmission Cable Bushing

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

This is the transmission side bushing that holds the gear selector cable to the selector lever. I modeled it for my 2003 Super Duty F550 with the 4r100 transmission. I'm sure it fits other models, but check to make sure yours uses this style. I did not model the clip, as mine was in good shape. It's a snug fit to get on, but so far it is working well. A Dorman replacement is $20. If I have issues in the future, I may update the design. I'm a 3d printing noob, so take the printer settings with a grain of salt. Cheers.