Files (3)
Choose the needed variant and slice it; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| cruciform_cover.stl | Cover / cap | 181.1 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
| long_cover.stl | Cover / cap | 142.9 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
| small_cover.stl | Cover / cap | 136.6 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
FORD Transit Seat Bench Cover (MK7)
Print this part
Check the available model and saved setup details before opening your slicer.
Files
3 hosted model files
STL
Material
PETG or ASA
Print time
Slice to calculate
Filament
Slice to calculate
Supports
verify in slicer
Infill
20-30% infill for durability, with 2-3 walls for strength
Difficulty
Not rated — inspect geometry
Vehicle heat
Cabin/interior use; avoid high-heat zones
Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.
License & use
The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.
Shared by
3DPrintedCarPartDescription
These are three covers for the second row of seats of a Ford Transit MK7 (V363). After removing the second row of seats, there are three openings in the floor for each leg of the bench: one long, one cruciform and one small. These covers fit into the openings. They stand on the body and are flush at the top (in line with the floor). That is, they do not protrude and something can be placed on them. When printed in black on a PEI, they are almost unnoticeable on regular ground.
Compatible Cars
Originally published on thingiverse.com by Car Orl (Moebelmogul123) · License: CC BY 4.0
Browse categories
Browse other part families
Jump to interior, exterior, accessories, dashboard, mechanical, or tools hubs when you need a different kind of replacement part.
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
Ford Car Stereo support bracket
MK7 Transit Sliding Door Rail End Cap
Ford radio remote retainer tab
Ford ventmount transit 2018+ with ball mount
Ford Transit Custum Magnetischer Handyhalter
2004-2010 Hyundai Sonata Headlight Dust cap
Hyundai
