Ford Transit "slim console" aux input bezel preview

Files (1)

2017 transit slim console socket backing plate.stl

STL

288.0 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
2017 transit slim console socket backing plate.stl	Primary model	288.0 KB STL	Slice file	Slice file	Slice file	Print with the visible side on the bed for a textured, factory-like finish

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Ford Transit "slim console" aux input bezel

0 downloads61 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG or ASA

Print time

Slice to calculate

Filament

Slice to calculate

Supports

verify in slicer

Infill

20-30% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

Public Domain

Commercial use allowed

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

After installing the "slim console" in my recently acquired 2017 Transit 150 to delete the giant cupholders and allow better accessibility to the passenger seat for my wife, I discovered that the original console's bezel for the aux input jack was shaped differently than the new console's, and that bezel for the new console is NLA from Ford. I knew my wife wouldn't stand for a gaping ugly hole in the dash and I needed a place for some USB chargers, so I whipped this up in Fusion to get the job done. This has to be installed before the console is in place, and uses a backing plate to stay in place, with the USB chargers sandwiching the whole assembly to the console, but there's enough slack in the wires that it wasn't a big deal. Curves aren't quite perfect but it's good enough for me and hard to notice. I printed with the visible side on the bed of my AD5X so the texture would help it look more "factory". I used Overture black PETG, if it warps I can reprint in ABS or ASA easily enough. STEP included if you want to mess with it yourself.