Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Ford Wheel Cap
Description
The wheel hole diameter is 48mm. This piece was made to replace the factory plastic piece maintaining the original metal part with the ford logo as the plastic ones became lose and where at risk of falling.
Compatible Cars
Originally published on thingiverse.com by Henrique Machado (Henrique_M) · License: CC BY-NC-ND
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
