Ford Wheel Centre Cap, Fits ford fiesta etc... - image

Files (1)

centre_cap.stl

STL

314.2 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
centre_cap.stl	Cover / cap	314.2 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Emblems/Badges

Ford Wheel Centre Cap, Fits ford fiesta etc...

0 downloads44 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Basic 54mm ford centre cap. I would recommend using ABS plastic to allow for some flex, if using PLA then apply some heat to the part when installing to prevent it from breaking. it may appear too large, if this is the case scaling it to 39% should work.