Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Center Console

Forester SH console insert

0 downloads59 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Subaru Forester centre console insert. Suits Forester SH 2008-2012. Subaru in all of their wisdom created quite possibly the worst centre console, which allows stuff inside to simply fall out. I created a pretty crude box/insert to go inside, and still allowing access to the RCA jacks etc. Also allows the use of the standard top pocket. Can be taped down, however I didn't and it doesn't move. No supports needed, I printed it solid. Approximately 17 hour print time.