Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| Shift_Knob_Cover.stl | Cover / cap | 40.7 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
FRS BRZ GT86 Shift Knob Reverse Lock Cover
Shared by
3DPrintedCarPartDescription
This simple part can cover the reverse lockout on the FRS/BRZ/GT86 for those who changed the shift knob. (see 1st and 2nd photo) I know you can get knobs that seat over the lock like the stock knob but if you have a knob that's not designed for the lockout, this is the part for you. The part goes onto the stick before you screw on the knob (3rd photo) and is securely seated once you tightly screw on your desired knob. The reverse lock should lift easily and still be covered to give the whole thing a cleaner look. NOTE: I believe this will also work on other manual trans. Subarus, I believe the newer WRX has a similar lockout mechanism. If you have a WRX and try this part and it works, please leave a comment so that others can confirm that it works! Thanks:).
Compatible Cars
Originally published on thingiverse.com by Ethan Gilbert (Virtual_Boi) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
