Files (1)

FRS_Trunk_Button_Cover_Bigger.stl

STL

502.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
FRS_Trunk_Button_Cover_Bigger.stl	Cover / cap	502.4 KB STL	Slice file	Slice file	Slice file	Use PETG / ASA; check sealing faces and verify in slicer.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Knobs/Buttons

FRS/BRZ Trunk Button Cover

0 downloads36 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

The Scion FRS, Subaru BRZ and Toyota GT86 from 2012-2020 have a button in the trunk that disables the trunk release on the key fob and in the interior of the car. This is a simple cover that prevents loose objects in the trunk from pushing it, but allows a key or other small object to still push the switch. I've printed a couple and seem to fit fine, and have been printing in PETG for better heat resistance in summer heat. I designed this in November in Canada, so it hasn't been tested in actual hot weather yet so YMMV and it might need ABS/ASA/etc in hotter climates.