Full Width Console Tray for Subaru Outback 4th Gen preview

Files (1)

outback_console_tray_shallow.stl

STL

408.5 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG 20%	PETG 18%	100% solid	Recommendation
outback_console_tray_shallow.stl	Primary model	408.5 KB STL	Slice file	Slice file	Slice file	Align the bottom of the tray to the build plate and manually rotate it 8.5° in the slicer for optimal results

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Full Width Console Tray for Subaru Outback 4th Gen

0 downloads4 views0 quality score

Print this part

Check the available model and saved setup details before opening your slicer.

Files

1 hosted model file

STL

Material

PETG

Print time

Slice to calculate

Filament

Slice to calculate

Supports

supports likely, verify in slicer

Infill

15-20% infill for durability

Difficulty

Not rated — inspect geometry

Vehicle heat

Cabin/interior use; avoid high-heat zones

Open the STL, 3MF, or OBJ model in your slicer before printing. Confirm orientation, supports, print time, filament use, and printer compatibility. Test-fit before installing it in a vehicle.

License & use

CC BY

Commercial use allowed

Attribution required

The file license permits commercial reuse, subject to any applicable attribution or share-alike terms. License status does not verify vehicle fitment, OEM rights, design patents, or safety.

Shared by

3DPrintedCarPart

Verified

Description

Console tray for 4th Generation (2010-2017) Subaru Outback. I modeled the original part, but without the blank for the ejector switch (or whatever the higher trim level comes with). Original tray was sized to fit 2009 cell phones and mine was always sliding out on turns. The new one is wider and has an adjustable depth. I printed a deep one for me, uploaded a shallow one here. Contact me if you want something else. Thingiverse appears to be mangling the pics so here's the full album: https://imgur.com/a/uFnBTBM Print instructions Category: Automotive Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution:.2mm Infill: 15% Filament: Inland PETG Silver Notes: The bottom of the tray has an 8.5° angle to it. So if you align the bottom to the build plate you can manually rotate it 8.5° in the slicer and the top will be level. This creates more support structure, but I think the layer lines end up looking better (see final image in the upload). How I Designed This I took some reference pics of the OEM part with a long lens (200mm) standing from far away to try to minimize distortion. I think imported that image as a background canvas in Fusion 360 so I could trace on top of it. This still wasn't perfect as there is still some distortion but I was able to build the model incrementally (ie first was just a rectangle, then 5 iterations later I added the curve across the top) All in this took about a dozen test parts and 20 hours of CAD / caliper time. My Fusion 360 skills went from a 2 to at least a 4 out of 10.