Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Gauge Panel v1 for BMW vehicles

0 downloads51 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

BMW E46 Gauge Panel For 52mm Instrumentation. Dual Gauges - 52mm Gauge mount - 57mm Bezel clearance - Windows Angled 12 degrees horizontally towards driver. ( eliminate parallax error on that plane ) - Recessed look. - Contour matched to OEM panel. - Outline interchangable with OEM Climate control panel. For mounting in Lower pocket ( Sun-glass holder ) or Upper dash mount. Printing Recomendations - Align Panel at 45 degree angle to minimize Supports, experiment with angles progressing vertical for better layer surface finish. Installation - Surface mount with 3M VHT to radio chassis.