Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 40%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Mechanical/Functional

GC8 GM6 GF8 AOS Mount

0 downloads41 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

This is a work in progress and I'll add notes if things are updated... I wanted to share this for those who needed a way to mount their IAG AOS in their swapped impreza (93-01). I made this mount as the mounting options for the classic Impreza's do not match up with the GD AOS bracket. The included bracket mounting points for the GD are where the AC module is located. This mount installs on the passenger side (USDM) forward of the strut tower and angles the AOS hoses towards the engine so they don't wrap or kink around the AOS. The mount utilizes the existing 8mm bolts that held the wire harness connector. The two holes on the lower left are where I had mounted my EBCS. EDIT: filled model across to account for mounting/drilling. I've test printed this in PLA to confirm fitment with AOS din rail and mounting points on the chassis. I'm currently waiting to test print this in ABS and PETG to see how it will hold in the engine bay using a variation of infill % and wall settings.