Files (2)
Based on 25% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| GU_gear_knob.stl | Printable file | 589.8 KB STL | Slice file | Slice file | Slice file | Print with the top of the knob facing down to minimize supports |
| GU_gear_knob_V2.stl | Printable file | 629.4 KB STL | Slice file | Slice file | Slice file | Print with the top of the knob facing down to minimize supports |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Gear knob for Nissan Patrol
Shared by
Michael ChenDescription
I converted my Patrol to manual transmission and needed a gear knob, so I made this basic JDM drifter/ ricer style gear knob in Fusion360. Designed to fit Nissan Patrol Y61 (a.k.a. GU), but also fits Nissan Patrol Y60 (a.k.a. GQ/ Ford Maverick).The thread is 10x1.25mm, so it may fit a variety of different vehicles. The thread is at the top of the knob so the knob sits down over the gear stick, giving the appearance that the stick is shorter than normal. I printed this in black PLA with 5 perimeters and 25% infil. Printed upside down so the top of the knob was stuck to the bed. I've only had it for a short time, but it doesn't look like it's suffering from the summer heat -.
Print Settings
Compatible Cars
Originally published on thingiverse.com · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
