← Back to Browse Parts
Files (1)
e34_bmw_gear_leaver_plate.stl
STL
131.2 KBPrint guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
14g
Based on 25% main infill across listed model files
Material cost
$0.35
Filament only at roughly $24/kg PETG / ASA
Print time
25m–41m
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| e34_bmw_gear_leaver_plate.stl | Primary model | 131.2 KB STL | 13g $0.32 | 14g $0.35 | 32g $0.76 | Ensure a strong adhesion to the print bed to prevent warping |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Knobs/Buttons
gear stick selector plate/cover for BMW vehicles
0 downloads37 views0 likes
Shared by
3DPrintedCarPartVerified
Description
This is a basic replacement for the plastic gear selector on a bmw e34 that tends to snap.
Compatible Cars
Published Jun 28, 2026Updated Jul 15, 2026
Originally published on thingiverse.com by Nattharika Dales (dales510) · License: CC BY
Verified by drivers
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.
Related Parts
Most specific car + model + year + category matches first, with popular parts mixed in.
