Gen6 Camaro Coolant Bottle Cover - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	ASA / ABS 20%	ASA / ABS 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Gen6 Camaro Coolant Bottle Cover

0 downloads49 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

The coolant bottle in the 6th generation Camaro SS (2019+) kind of sticks out because it's the only white/pink object under the hood. This is a first attempt at a black cover for it. The cover is too big to print in one piece on my FlashForge Adventurer 3, so I had to build it in two parts that are joined together using two Honda bumper retainer clips (91512-SX0-003). That also allows it to be assembled in two pieces on the coolant bottle. The engine bay is a hostile place, so I'm not sure a printed part is going to last long, even though I printed it with ABS, which supposedly has a "maximum service temperature" of 98C/208F. I'll leave it installed for a few weeks and see how it does.