Files (1)

GPS.stl

STL

959.7 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
GPS.stl	Primary model	959.7 KB STL	Slice file	Slice file	Slice file	Ensure the model is oriented to minimize supports in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

GPS FOR 2015 FIESTA

0 downloads32 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this to hold my iphone (5s) in my 2015 Ford Fiesta. I fits nicely over the far left vent near the door. The vent area is curved and a couple of small pieces of 2 sided tape keep it in place. It holds the phone in landscape position for best GPS viewing. there is access on the left side for power cord. This will not block any view of the road. It could me modified with a hole for the camera, or access to the sleep/wake button. Have Fun, be safe, don't txt and drive Bobby O'Seal created in Inventor / KISSLICER / CubeX Trio.