Handfree microphone support Citroen Xsara Picasso - image

Files (1)

bouton3.stl

STL

56.4 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
bouton3.stl	Primary model	56.4 KB STL	Slice file	Slice file	Slice file	Ensure the part is oriented to minimize supports in your slicer

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Handfree microphone support Citroen Xsara Picasso

0 downloads34 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed this part in order to install my Pioneer DEH-S040BT car stereo handfree microphone inside my Xsara picasso. Maybe it works with other handsfree sets... I was afraid that since the microphone is partially surrounded by pla the voice would be muffled or any problem like that...but after testing it, it works good. I use the 3d printed part instead of an unused button of the Xsara Picasso dashboard.