← Back to Browse Parts
Peugeot iOn/ Citroen C-Zero/ Mitsubishi I-MIEV Clock holder - image

Files (1)

Clock_holder.stl
STL
83.2 KB
Print guidance estimate
Estimated from part metadata
Print cost & setup estimate
Planning numbers for filament, cost, time, and setup. Treat them as estimates until you confirm the file in your slicer.
1 model file
Recommended kit
13g

Based on 25% main infill across listed model files

Material cost
$0.30

Filament only at roughly $24/kg PETG / ASA

Print time
22m–36m

Uses 70 mm/s, 0.2 mm layers; verify supports in slicer

STL fileRoleSource sizePETG / ASA 20%PETG / ASA 25%100% solidRecommendation
Clock_holder.stlMount / bracket83.2 KB STL
12g
$0.28
13g
$0.30
28g
$0.66
Use double-sided foam tape for mounting as described

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Dashboard

Peugeot iOn/ Citroen C-Zero/ Mitsubishi I-MIEV Clock holder

0 downloads42 views0 likes
3DPrintedCarPart logo
Verified

Description

Dashboard clock holder for the Peugeot iOn / Citroën C-Zero / Mitsubishi i-MiEV platform. Designed to mount the small clock on the dash using double-sided foam tape.

Compatible Cars

Published Jun 26, 2026Updated Jul 15, 2026

Originally published on thingiverse.com by István Magi (RC_HC_2) · License: CC BY

Verified by drivers

Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.

Loading fitment proof…
Sign in to share fitment proof, installed photos, and material notes.
Comments (0)
Part lists
Save this part to named public or private collections. Public lists can be shown on this part page.