Headlight Cleaner Delete Cap for BMW E36 - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / TPU 20%	PETG / TPU 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Light Covers

Headlight Cleaner Delete Cap for BMW E36

0 downloads33 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

A little cap to cover the small holes underneath the headlights when your E36 has no headlight cleaners or if you want to remove them for a cleaner look. It's a little small, so you might want to print it at 110-115%. At 120% the clips need to be trimmed in width to fit the gaps, but the cap will cover the hole better. I used PLA, but any material works really. It needs a little flexibility to fit in the clips. One clip is a little shorter to make inserting the cap easier.