Files (1)
Based on 63% main infill across listed model files
Filament only at roughly $24/kg PETG / ASA
Uses 70 mm/s, 0.2 mm layers; verify supports in slicer
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 63% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| 28mm_hitch_bolt_cover_102_percent.stl | Cover / cap | 64.4 KB STL | 11g $0.26 | 19g $0.45 | 26g $0.62 | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Hitch Bolt cover 28mm, 2017 Ram 1500, U-Haul hitch
Shared by
3DPrintedCarPartDescription
My U-Haul class III / IV 2" hitch which fits a 2017 Ram 1500 came with a rubber 6-sided bolt cover being the bolt protrudes slightly above the bumper. After 1 year this cap came so brittle it fell apart in my hand so I decided to make a replacement. You should be able to scale this to fit any 6 sided bolt as well. Printed at 75 percent infill so if I stepped on it by accident, it might survive. *Note, I had to print at 102 percent, at 100 percent is was the exact size of the bolt (didn't think about that when designing). At 102 percent the cap was a tiny bit loose so I decided instead of gluing it, I put a layer of electrical tape around the bolt to shim it up.*
Compatible Cars
Originally published on thingiverse.com by Michael A (WooHoo2You) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
