Hitch cap Mercedes Benz / Anhängerkupplung Deckel - image

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

0 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
No printable model files are available for an estimate yet.

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Hitch cap Mercedes Benz / Anhängerkupplung Deckel

0 downloads38 views0 likes

Download at source

Shared by

3DPrintedCarPart

Verified

Description

Hitch cover with Mercedes Benz Logo, made from from https://www.thingiverse.com/thing:4532764 and https://www.thingiverse.com/thing:1552272 Print Settings (Redline PLA) wall line count: 4 Infill 50% Speed 60mm/s Retraction 45mm/s/5mm 200°C Hotend, 60°C Bed plate bonding skirt combing mode all no supports printing duration at this settings about 5 hours Use bright colors, when printing in PLA or usind PETG, ABS or ASA, if you want dark colored Changelog ------------------- 2022_03_06 Updated to V2 - Ceiling changed to a rounding with lower angle to get a better print result without supports.