Files (1)
Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 35% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| honda_cr_v_dust_cover.stl | Cover / cap | 249.6 KB STL | Slice file | Slice file | Slice file | Use PETG / ASA; check sealing faces and verify in slicer. |
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Honda CR-V 2007-2011 Headlight Dust Cover
Shared by
3DPrintedCarPartDescription
Hi! I made this for my 2008 Honda CR-V. I noticed one of the covers got lost but I still had one left, so I decided to take some measurements and create it in Autodesk Fusion 360. This is a 99% fit. On mine, I still needed to adjust the gap between the pins and the body with a sharp razor. I printed this on my Tevo Tarantula with some random brand orange PLA, 0.2 mm layer size, 100% infill, support and 65% speed.
Originally published on thingiverse.com by Lucian Lilu (lpavaloi) · License: CC BY
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
