Honda e wheel hub cap RC-Design RC30 - image

Files (3)

base.stl

STL

316.1 KB

emblem_outside.stl

STL

141.9 KB

outside_inside.stl

STL

83.9 KB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

3 model files

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
base.stl	Printable file	316.1 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
emblem_outside.stl	Printable file	141.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping
outside_inside.stl	Printable file	83.9 KB STL	Slice file	Slice file	Slice file	Ensure a strong adhesion to the print bed to prevent warping

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Honda e wheel hub cap RC-Design RC30

0 downloads236 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I designed these wheel hub caps for my Honda e accessories wheels, the RC-Design RC30 SG. The diameter of the wheel hub is 60mm, the caps are 59,60mm and fit very nicely without play. I printed the base black and the Honda emblem white. Sanded them smooth until the layer lines disappeared. Put the parts together and used a soldering iron to melt the strips that stand out from the backside to fix them in place. Finally I spray painted the caps with a couple layers of clear coat.