Files (1)

Honda_Fit_viser_clip_v1.stl

STL

2.9 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

1 model file

Recommended kit

Slice required

Slice the required model files; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Honda_Fit_viser_clip_v1.stl	Clip	2.9 MB STL	Slice file	Slice file	Slice file	Print on its side for optimal strength

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Interior

Honda Fit Visor clip

0 downloads41 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

Printed a visor clip for a Honda Fit. Found previous clips on site but were very stiff when using nGen. Designed a new more flexible clip that works great for my situation. Make sure to print on it's side with support for the top cylinder only. Reason is for strength in the way the plastic is deposited by the extruder. I also increased the wall lines to 4 for extra strength. This is a new design from scratch but thanks to bfuller181 for the original idea.