Slice the required model files; source file size is not printable volume.
Use the slicer's filament total; STL/3MF byte size is not a cost input.
Slice with the recommended material, infill, orientation, and supports.
| STL file | Role | Source size | PETG / ASA 20% | PETG / ASA 25% | 100% solid | Recommendation |
|---|---|---|---|---|---|---|
| No printable model files are available for an estimate yet. | ||||||
Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.
Honda Key Cover
Shared by
3DPrintedCarPartDescription
I had a new key blank cut for my Honda to replace a key that no longer worked to turn the ignition. It was way cheaper than cutting a chipped key and getting it programmed. You need to carefully cut the plastic cover from the original key to remove the chip inside along with the rubber mount for the chip. You then insert the chip into the newly cut key and place inside the new case. I just used glue to secure the two halves. I printed this at.2 layer height in PLA.
Compatible Cars
Originally published on thingiverse.com by Michael Giunta (whiterabbit06) · License: CC BY-NC-SA
Share whether this print actually fits a real car. Installed photos and material notes make the catalog more trustworthy.
Related Parts
Finding specific fitment/category matches first.
