Honda Odyssey Tablet Holder (Lenovo Tab 7) - image

Files (2)

Draft_Print.stl

STL

915.9 KB

Holder_Odyssey.stl

STL

3.1 MB

Print guidance estimate

Slicer data required

Print cost & setup estimate

Setup guidance plus saved or slicer-confirmed filament, cost, and time. Model file size is never treated as printable volume.

2 model files

Typical selected file

Slice required

Choose the needed variant and slice it; source file size is not printable volume.

Material cost

Slice required

Use the slicer's filament total; STL/3MF byte size is not a cost input.

Print time

Slice required

Slice with the recommended material, infill, orientation, and supports.

STL file	Role	Source size	PETG / ASA 20%	PETG / ASA 25%	100% solid	Recommendation
Draft_Print.stl	Printable file	915.9 KB STL	Slice file	Slice file	Slice file	Ensure the lip is facing upwards for potential spring retainer functionality if needed
Holder_Odyssey.stl	Mount / bracket	3.1 MB STL	Slice file	Slice file	Slice file	Ensure the lip is facing upwards for potential spring retainer functionality if needed

Saved setup guidance is used for material, infill, support, and per-file recommendation text; editable numbers are planning estimates only.

Phone Mounts

Honda Odyssey Tablet Holder (Lenovo Tab 7)

0 downloads31 views0 likes

Shared by

3DPrintedCarPart

Verified

Description

I use Lenovo Tab 7 tables as a GPS and e-book reader with @Voice Aloud by Hyperionics.com (A superb app that keeps me sane during my commute! Check it out here: https://play.google.com/store/apps/details?id=com.hyperionics.avar) in a Honda Odyssey. I tried multiple mounts for that tablet and phones, none were good enough, the last one nearly pulled out the CD player face plate. So, I made a holder that fits into the panel shelf/cavity. It holds in the cavity well enough. There is a lip I planned to heat and bend out to work as a spring retainer, but left it flat as is. Turned out it was not really necessary, a few napkins folded around the insert keep it in place just fine. Here is the original project. https://a360.co/2G3YhGz Holder would fit any tablet that is 112 mm wide, up to 10 mm thick. I made the hole for the power and volume buttons for Lenovo Tab 7. Other tablets may fit as well.